MODEform are post foming grade laminates in a stunning modern range of solid
colors, exotic wood patterns, stone and fantasy designs. MODEform laminate is
multilayered built-on and insist on impregnated melamie resined decor paper and
phenol resin core paper.
MODEform is suitable for horizontal general postforming (HGP) and vertical general
postforming (VGP). It’s also available with an additional Overlay (MODEshield).
Hereby upgrading you the scratch and abrasion properties.
Click here to download the brochure (English | Arabic)
Front panels for all kind of furniture, kitchen worktops, heavy duty doors. MODEform
is used by private homes, (kitchen or bathrooms), offices, hospitals, schools or
hotels.
Thickness
0,4 mm – 1,2 mm
Thickness
Tolerance
+- 1.0 mm
Length
Flexible lenght up to 6000 mm
Length
Tolerance
+5 mm / -0 mm
Width
650, 1220, 1300, 1310 and 1320 mm
Width
Tolerance
+5 mm / -0 mm
Available
Texture
Matt, Pearl, Crystal, Nature Touch, Ash Wood
MODEform with a nominal thickness of 0,4 mm to 1,2 mm is length postformable.
Temperature of Laminate
165°C -175°C
Response time
11-25 seconds
Min. radius
Schichtstoffdicke - 2) X 10
Resistance to wear
Revolutions
Index EN 438-2
Resistance to impact
By small ball
Power in Newton
Index EN 438-2
Resistance to wear
Power in Newton
Index EN 438-2
Resistance to immersion in boiling water
Resistance to heat
Resistance to staining
Group 1-2
Group 3-4
Resistance to cigarette burns
Light fastness
Resistance to Fire DIN 4102
HGP
VGP
Flooring Laminate
Special Overlay
> 350
3
> 150
2
> 3500 / > 4000
AC2, AC3, AC4
> 20
3
> 15
2
> 20
3
>3
3
> 2
2
> 2
3
5
5
5
5
5
5
5
4
5
4
5
4
4
4
4
4
4
4
Class B
Class B
Class B
a) Recommended storage conditions are 25°C and 45 % -65 % relative humidity
b)Stock the rolls horizontal incumbent. The surface should be covered with an
adapted material to protect them for dust.
MODEform is adapted for laminating of chipboards. For gluing MODEform it is
possible to use usual Urea resin and dispersion adhesive for hot or cold pressing.
The laminate and the mounting plate have to be conditioned under normal terms, to
avoid wrong adhesions.
We recommend that the decorative surfaces may be cleaned with warm water and
mild soaps, such as those used for hands and dishes. We do not recommend the use
of cleaners, which may contain abrasives, acids or alkalis; they will damage the
decorative surface.