First impression last. And what is finished well stays good for years to come.
MODEedge, melamine edgebands are available in rolls of 50 m & 100 m with widths in the range of 15 - 45 mm. Modeedge is available with pre applied hot melt glue for small usage by carpenters, joinery shops and without glue for larger runs at factories. Modeedge is a flexible and tough material suitable for finishing the exposed edges and completes the details perfectly.
Click here to download the brochure ( English | Arabic )
Available in
Length (lm)
Width (mm)
Rolls
50 and 100
15 - 60
Textures
Matt, Pearl, Nature Touch, Ash wood
MODEdge can be easily fixed to any substrate (MDF / Chip Board / Plywood). Use from either non-glued or pre-glued bonding as per your requirement.
Standard Value
Modecor value
Resistance to wear
- Taber Cycles AP
- Index as per EN 438
> 150
2
> 150
2
Resistance to scratch
- Load in Newton
- Index as per EN 438
> 1.75
2
> 2
3
Resistance to Stream
No visible change - 5
Resistance to Cracking
No cracks - 5
Resistance to immersion in boiling water
- Appearance
No visible change - 5
Resistance to Staining
- Group 1 and 2
- Group 3 and 4
No effect - 5
Mild effect - 4
Resistance to Fire
Class - B
Non-Glued Edge Bands
1. Apply any water based adhesive (PVAC) to the edge of the substrate.
2. Allow for drying till the glue is tacky.
3. Carefully align the MODEedge band with the decor side up on to the glued surface and fix firmly by applying even pressure.
Pre-Glued Edge Bands
1. Unreel the required length of MODEedge band.
2. Fix firmly against the surface required to be covered and apply heat and even pressure, at the spot, attaining a temperature of around 140 - 160 °C.
Special Characteristics
Elasticity, good adhesion, low melt viscosity, good oxidation, good heat-sealing properties and heat resistance.
Pre-Glued MODEedge banding exhibits good wetting, excellent transfer characteristics and high tack with fast setting.
