Language:

العناصر اللازمه لتعيش خيالك
Decorative Postfroming Laminates

Modeform, Postforming Grade Laminates Suitable For Horizontal General Postforming (HGP) And Vertical General Postforming (VGP) Applications.

Modeform Is Available In A Thickness Range Of 0.4m To 1.0mm With A Width Up To 1320mm And Customized Length Up To 6000mm.

Modeform Gives Resistance To Mild Acids, Detergent, Solvent, Hot & Cold Temperature As Well As Dirt And Light. Modeform With An Additional Surface Protection Modeshield Is Available To Enhance The Scratch And Wear Resistance Properties For Special Application.

Typical Applications
Front panels for all kinds
of furniture		 VGS and VGP solid and wood colors without MODEshield*
Interior works and wall panelling VGS solid and wood colors without MODEshield*
Shelves HGP and HGS solid and wood colors with MODEshield*
Heavy duty doors VGS solid and wood colors without MODEshield*
Kitchen worktops HGP solid and wood colors with MODEshield*
Restaurants and hotel tables HGP and HGS solid and wood colors with MODEshield*
Office Tables HGP and HGS solid and wood colors with MODEshield*
Product Specifications
Thickness 0.4 - 1.0 mm
Thickness Tolerance ±0.1 mm
Length Flexible lengths up to 6000 mm
Length Tolerance + 5mm / -0mm
Width 650, 1220, 1300, 1310 and 1320 mm
Width Tolerance + 5mm / -0mm
Flatness 60 mm / mtr
Available Textures Matt, Pearl, Nature Touch,Ashwood, Crystal, Metallic, Quarry, Textile, Barnboard, Matt Al
Typical Applications
Technical Specifications
as per EN 438		 Solid Colors
HGS & VGS		 Wood Colors
without MODEshield*
VGS		 Wood Colors with
MODEshield*
HGS
Resistance to wear
  • Taber Cycles AP
 ≥ 350 50 ≥ 350
  • Index as per EN 438
 3 1 3
Resistance to impact by small dia. ball**
  • Spring force in Newton
 ≥ 20 ≥ 15 ≥ 20
  • Index as per EN 438
 3 2 3
Resistance to scratch
  • Load in Newton
 ≥ 2 ≥ 2 ≥ 3
  • Index as per EN 438
 2 2 3
Resistance to Steam No visible change - 5 No visible change - 5 No visible change - 5
Resistance to Cracking No crack - 5 No crack - 5 No crack - 5
Resistance to immersion in boiling water
Appearance No visible change - 5 No visible change - 5 No visible change - 5
Resistance to Staining
Group 1 and 2 No effect - 5 No effect - 5 No effect - 5
Group 3 Mild effect - 4 Mild effect - 4 Mild effect - 4
Resistance to cigarette burns Slight change - 4 Slight change - 4 Slight change - 4
Resistance to Fire Class B Class B Class B

Post Forming is the process of heating and bending laminates under controlled temperature and pressure at the curved edges.

The process gives neatly finished and aesthetically appealing products that are free from joints. The radius of forming varies between 3 to 19mm depending on the grade and thickness of the laminate selected.

Modecor Postformable Laminates:

Modecor laminates and their individual application and surface characteristics allow you to combine product mix and match from the attractive color range and textures to create the look you require and express your own style.

Modecor recommends that the decorative surfaces may be cleaned with warm water and mild soaps, such as those used for hands and dishes. We do not recommend the use of cleaners, which may contain abrasives, acids or alkalis; they will damage the decorative surface. Remove stubborn stains with a 1.5-minute exposure to a hypochlorite bleach, followed by a clean water rinse.

It is recommended that any of following reagents should not come in contact with the decorative surfaces.

  • Alcohol containing 1% iodine in solution
  • Berry products
  • Gentian violet
  • Hydrogen peroxide solution
  • Hypochlorite bleach, except as described above
  • Lye solutions
  • Mild silver protein, such as 20% argyrols
  • Mineral acids, hydrochloric acid such as Lime-A-Way, sulfuric or nitric acid
  • Potassium permanganate
  • Silver nitrate, in 1% concentration
  • Sodium bisulfate, such as Sani-Flush

If a laminate is required to withstand these chemicals, please refer to the technical data for Modecor laminates or contact us.

Storage Tips For Laminates

  • Recommended storage conditions are 25°C temperature and 50% relative humidity.
  • Store the sheets horizontally and full size, covered with suitable material to prevent from dust.

Modecor warrants that under normal use and service, the material and workmanship of its products shall conform to the standards set forth on the applicable technical data sheets, for a period of one (1) year from the date of sale to the first consumer purchase. In the event that the product does not perform as warranted, the first consumer purchaser’s sole remedy shall be limited to repair or replacement of all or any part of the product which is defective, at the manufacturer’s sole discretion.

This warranty applies only to products:

In their original installation Purchased by the first consumer purchaser

This warranty is not transferable and expires upon the resale or transfer by the first consumer purchase. This warranty shall not apply to defects or damage arising form any of the following:

Improper fabrication or installation Improper maintenance Exposure to extreme temperature Accidents, abuse or misuse.

No other warranties, expressed or implied, are made, including merchantability or fitness for a particular purpose. Under no circumstances shall Modecor be liable for any loss or damage arising from the purchase, use, or inability to use this product or for any special, indirect, incidental or consequential damages. No fabricator, installer, dealer, agent or employee of Modecor has the authority to modify the obligations or limitations of this warranty.

© 2020 Developed by dot.jo. All rights reserved.