العناصر اللازمه لتعيش خيالك
Decorative Laminates

MODEpal, standard grade (HPL) laminates are suitable for most horizontal and vertical flat surfaces applications.

Available in various textures and wide range of attractive colors. These laminates can be bonded by permanent adhesive like Urea, PAVc and other contact type glues.

MODEpal are available in sheet forms of 0.5mm to 1.2mm thickness, width of 1220mm and 1300mm, and customized length up to 6000mm.

Typical Applications
Interior use for Horizontal General purpose Standard (HGS) and Vertical General purpose standard (VGS) applications.
Product Specifications
Extures
Matt, Pearl, Nature Touch & Ash Wood textures
 
 
PVC Rolls
50 and 100
22
0.5 and 2.00
Textures
Matt & Pearl Textures
 
 
Typical Application
Thickness 0.5 - 1.2mm
Thickness Tolerance ±0.1mm
Length 2440mm & customized lengths up to 6000mm
Length Tolerance + 5mm / -0mm
Width 1220mm,1300mm
Width Tolerance + 5mm / -0mm
Flatness 60mm / mtr
Available Textures Matt, Pearl, Nature Touch, Ashwood Crystal, Metallic, Quarry, Textile, Barnboard, Matt Al
Typical Applications
Technical Specifications
as per EN 438
Solid Colors
HGS & VGS
Wood Colors without
MODEshield*
VGS
Wood Colors
with MODEshield*
HGS
Resistance to wear
  • Taber Cycles AP
≥ 350 50 ≥ 350
  • Index as per EN 438
3 1 3
Resistance to impact by small dia. ball**
  • Spring force in Newton
≥ 20 ≥ 15 ≥ 20
  • Index as per EN 438
3 2 3
Resistance to scratch
  • Load in Newton
≥ 2 ≥ 2 ≥ 3
  • Index as per EN 438
2 2 3
Resistance to Steam No visible change - 5 No visible change - 5 No visible change - 5
Resistance to Cracking No crack - 5 No crack - 5 No crack - 5
Resistance to immersion in boiling water
Appearance No visible change - 5 No visible change - 5 No visible change - 5
Resistance to Staining
Group 1 and 2 No effect - 5 No effect - 5 No effect - 5
Group 3 Mild effect - 4 Mild effect - 4 Mild effect - 4
Resistance to cigarette burns Slight change - 4 Slight change - 4 Slight change - 4
Resistance to Fire Class B Class B Class B

Modecor laminates and their individual application and surface characteristics allow you to combine product mix and match from the attractive color range and textures to create the look you require and express your own style.

Modecor recommends that the decorative surfaces may be cleaned with warm water and mild soaps, such as those used for hands and dishes. We do not recommend the use of cleaners, which may contain abrasives, acids or alkalis; they will damage the decorative surface. Remove stubborn stains with a 1.5-minute exposure to a hypochlorite bleach, followed by a clean water rinse.

It is recommended that any of following reagents should not come in contact with the decorative surfaces.

  • Alcohol containing 1% iodine in solution
  • Berry products
  • Gentian violet
  • Hydrogen peroxide solution
  • Hypochlorite bleach, except as described above
  • Lye solutions
  • Mild silver protein, such as 20% argyrols
  • Mineral acids, hydrochloric acid such as Lime-A-Way, sulfuric or nitric acid
  • Potassium permanganate
  • Silver nitrate, in 1% concentration
  • Sodium bisulfate, such as Sani-Flush

If a laminate is required to withstand these chemicals, please refer to the technical data for Modecor laminates or contact us.

Storage Tips For Laminates

  • Recommended storage conditions are 25°C temperature and 50% relative humidity.
  • Store the sheets horizontally and full size, covered with suitable material to prevent from dust.

Modecor warrants that under normal use and service, the material and workmanship of its products shall conform to the standards set forth on the applicable technical data sheets, for a period of one (1) year from the date of sale to the first consumer purchase. In the event that the product does not perform as warranted, the first consumer purchaser’s sole remedy shall be limited to repair or replacement of all or any part of the product which is defective, at the manufacturer’s sole discretion.

This warranty applies only to products:

In their original installation Purchased by the first consumer purchaser

This warranty is not transferable and expires upon the resale or transfer by the first consumer purchase. This warranty shall not apply to defects or damage arising form any of the following:

Improper fabrication or installation Improper maintenance Exposure to extreme temperature Accidents, abuse or misuse.

No other warranties, expressed or implied, are made, including merchantability or fitness for a particular purpose. Under no circumstances shall Modecor be liable for any loss or damage arising from the purchase, use, or inability to use this product or for any special, indirect, incidental or consequential damages. No fabricator, installer, dealer, agent or employee of Modecor has the authority to modify the obligations or limitations of this warranty.