العناصر اللازمه لتعيش خيالك
MDF and Chipboards

MODEpan, thermo-fused melamine faced prelaminated MDF / Chipboard panels; these are excellent materials for horizontal and vertical surfaces and designed for the new age.

MODEpan is available in a standard size of 1220 x 2440mm and other lengths like 3050mm and 3600mm are available on request, the thickness range is from 3mm to 38mm.

These are also available in option of 1-face melamine and 2-face melamine for special application if required MODEpan panels are used by the furniture industry for all types of home, office furniture and other interior and architectural work. The production of flat panel furniture has never been easier without our MODEpan.

Typical Applications Recommended Products
Front Panels for all kinds of Furniture solid and wood colors without MODEshield*
Interior Works & Wall Panelling solid and wood colors without MODEshield*
Shelves solid and wood colors with MODEshield*
Carcasses solid and wood colors without MODEshield*
Kitchens Worktops solid and wood colors with MODEshield*
Restaurants and Hotel Tables solid and wood colors with MODEshield*
Office Tables solid and wood colors with MODEshield*

 

Thickness 3-38mm
Thickness Tolerance +0.5 mm / -0.3mm
Length 2440, 3050 and 3600mm
Length Tolerance ± 5mm
Width 1220mm
Width Tolerance ± 5mm
Edge Chipping ≤ 5mm
Available Textures Matt, Pearl, Nature Touch & Ash wood Textures
Technical Specifications

as per EN 14322
Solid & Wood Colors with

MODEshield*
Wood Colors without

MODEshield*
Resistance to wear
  • Taber Cycles AP
≥ 350 50
  • Index as per EN 14322
3 1
Resistance to Scratch
  • Load in Newton
≥ 3 ≥ 2.5
Resistance to Steam No visible change - 5  
Resistance to Cracking No crack - 5  
Resistance to Staining No effect - 5  
Resistance to Cigarette burns Slight change - 4  
Panels can be produced with MODEshield* in any wood design for direct Work Top application with more than 350 Cycles Abrasion Resistance (one side wood and the other side is brown backing).
*MODEshield: Extra surface technology provides protection against reasonable wear and scratches.

Modecor recommends that the decorative surfaces may be cleaned with warm water and mild soaps, such as those used for hands and dishes. We do not recommend the use of cleaners, which may contain abrasives, acids or alkalis; they will damage the decorative surface. Remove stubborn stains with a 1.5-minute exposure to a hypochlorite bleach, followed by a clean water rinse.

It is recommended that any of following reagents should not come in contact with the decorative surfaces.

  • Alcohol containing 1% iodine in solution
  • Berry products
  • Gentian violet
  • Hydrogen peroxide solution
  • Hypochlorite bleach, except as described above
  • Lye solutions
  • Mild silver protein, such as 20% argyrols
  • Mineral acids, hydrochloric acid such as Lime-A-Way, sulfuric or nitric acid
  • Potassium permanganate
  • Silver nitrate, in 1% concentration
  • Sodium bisulfate, such as Sani-Flush

If a laminate is required to withstand these chemicals, please refer to the technical data for Modecor laminates or contact us.

Storage Tips For Laminates

  • Recommended storage conditions are 25°C temperature and 50% relative humidity.
  • Store the sheets horizontally and full size, covered with suitable material to prevent from dust.

Modecor warrants that under normal use and service, the material and workmanship of its products shall conform to the standards set forth on the applicable technical data sheets, for a period of one (1) year from the date of sale to the first consumer purchase. In the event that the product does not perform as warranted, the first consumer purchaser’s sole remedy shall be limited to repair or replacement of all or any part of the product which is defective, at the manufacturer’s sole discretion.

This warranty applies only to products:

In their original installation Purchased by the first consumer purchaser

This warranty is not transferable and expires upon the resale or transfer by the first consumer purchase. This warranty shall not apply to defects or damage arising form any of the following:

Improper fabrication or installation Improper maintenance Exposure to extreme temperature Accidents, abuse or misuse.

No other warranties, expressed or implied, are made, including merchantability or fitness for a particular purpose. Under no circumstances shall Modecor be liable for any loss or damage arising from the purchase, use, or inability to use this product or for any special, indirect, incidental or consequential damages. No fabricator, installer, dealer, agent or employee of Modecor has the authority to modify the obligations or limitations of this warranty.